Operation
84
•
Remove the mounting screw (1).
•
Pull the side panel from the mounting (2) and remove it
from the excavator.
For installation first press the side panel into the
mounting and reinstall all the screws.
Replacing the bucket
When replacing the bucket, make sure to wear an eye protection, a helmet and protective gloves.
During attaching and detaching, chippings and burrs may occur at the bolts or bushings. These
may cause severe injuries.
Never use your fingers for the alignment of the components (link, bucket, arm). The components
may sever your fingers by uncontrolled movements.
Anti-theft system
The excavator is equipped with an anti-theft system that restricts the engine to be started using a registered
key only. If a registered key gets lost or stolen, you can invalidate it. This will prevent the engine from being
started with this key, thus protecting the vehicle against theft. The anti-theft system makes it difficult to steal the
machine. However, it can not fully prevent theft.
If the starter switch is set to STOP, the indicator light (1) is illu-
minated, indicating the activation of the anti-theft system.
Make sure that the indicator light is illuminated when leaving the
machine.
The vehicle comes with two different types of key:
