MAINTENANCE
68
B
Checking Radiator and Oil Cooler
To avoid personal injury:
A
Always stop the engine and remove the key
before checking the radiator.
A
Wear eye protection when cleaning with
compressed air.
1. Check to see if the condenser fins are clogged with
dirt. If so, loosen the bolts and tilt the condenser.
Remove the dirt using compressed air or tap water.
Tilt down the stopper in the direction to the locked
position. When cleaning, wear eye protection
absolutely. Tilt down the oil cooler by loosening the
two bolts to clean easily.
2. Check the rubber hoses for damage and replace if
cracked or old. Check if the hose clamps are tight
enough.
A
Radiator and oil cooler fins and ribs must be clean in
order not to overheat the engine and allow free flow of
air through the cooling elements.
A
Pressure of compressed air must be under 205 kPa
(2.1 kgf.cm ).
B
Checking Washer Liquid
If the windows washer is switched on with the washer
liquid tank empty, the motor may be damaged. Always
keep the tank filled.
(1) Radiator
(2) Oil cooler
(3) Bolt
(4) Stopper
(1) Radiator
(2) Oil cooler
(3) Stopper
(1) Hose clamp
(2) Rubber hose
(1) Washer liquid tank
Summary of Contents for KX057-4
