89
OTHER ADJUSTMENTS AND REPLACEMENTS
CHANGING THE BUCKET
To avoid personal injury:
A
There are two people required to replace the
bucket. One person operates the excavator,
and the other one mounts the bucket.
The person who mounts the front must
command-guide the movements of the front
end attachments. The operator should move
the front end attachments only according to the
commands of the person who mounts the
bucket. A continuous intervisibility between
both persons is indispensable. If there is no
intervisibility, stop working immediately.
A
When replacing the bucket, make sure to wear
an eye protection, a helmet and protective
gloves.
A
During attaching and detaching, chippings and
burns may occur at the bolts or bushings.
These may cause severe injuries.
A
Never use your fingers for the alignment of the
components (linkage, bucket, arm). The
components may sever your fingers by
uncontrolled movements.
A
Read the manual of the attachment to do a
correct operation safely when other
attachments are installed instead of Kubota
specified bucket.
FUSES
To avoid personal injury:
A
When changing fuse, stop the engine and turn
the key in position "STOP".
B
Replacing Fuses
1. Remove the cover of the fuse box.
2. Replace the burnt out fuse with a fuse having the same
capacity.
(1) Fuse box
(1) Cover
Summary of Contents for KX057-4
