OPERATION OF THE ENGINE
30
4. Set the starter key to the
"RUN"
position. Hold the key
at this position until the "
" mark on the display panel
disappears.
5. Now make sure the "
" and "
" marks appear
onscreen. If not, the system is malfunctioned. Contact
your local dealer.
6. Turn the key to the position
"START"
and release
after the engine has started.
7. Check if all warning lamps have gone out. Should a
warning lamp still be lit up, stop the engine then
remove the key and check for the cause.
A
The starter motor consumes large current. Avoid
running it longer than 10 seconds continuously.
If the engine fails to start within 10 seconds, once set
the key to the
"STOP"
position, wait for 20 seconds or
longer, and repeat the above steps 5 thru 8.
A
If the battery is dead and must be connected to
another battery with jumper cable, be sure to use a
12V battery. Never use any 24V batteries.
A
If you keep the pilot control lock lever at
"UNLOCK"
and try to get the engine started,
"Up Lever Lock"
appears on the meter panel and the engine cannot be
started. Before staring the engine, make sure the pilot
control lock lever is set at the
"LOCK"
position.
A
When the engine gets started, the meter may
momentarily turn off and a peep may sound. This is not
a trouble.
(1) Starter switch
(A) "STOP"
(B) "RUN"
(C) "START"
Summary of Contents for KX057-4
