Kubota KGZ770-MA1, Operator'S Manual

Page: 92 / 117

PERIODIC SERVICE 72
ENGLISH
6. Apply a slight coat of oil onto the gasket of new filter.
7. Tighten the filter quickly until it contacts the mounting
surface. Tighten filter by hand an additional 1/2 turn
only.
8. After the new filter has been replaced, the
transmission fluid level normally lowers a little. Add
fluid to proper level. Check for oil leaks around filter
gasket.
9. Return the bottom dust cover to the original position.
A
To prevent serious damage or premature failure to the
hydraulic system, use only a KUBOTA genuine filter.
B
Replacing Fuel Filter
Consult your local KUBOTA Dealer for this service.
EVERY 500 HOURS
B
Adjusting Engine Valve Clearance
If you do not have the proper tools and/or are not
mechanically proficient, consult your local KUBOTA
Dealer for this service.
EVERY AFTER 1000 HOURS
B
Cleaning Combustion Chamber
If you do not have the proper tools and/or are not
mechanically proficient, consult your local KUBOTA
Dealer for this service.
EVERY 1000 HOURS or EVERY 1 YEAR
Replace every 1000 hours or every 1 year whichever
comes faster.
B
Replacing Air Cleaner Primary Element
and Secondary Element
(See "Cleaning Air Cleaner Primary Element" in "EVERY
100 HOURS" in "PERIODIC SERVICE" section.)
A
To prevent serious damage to the engine, use only a
KUBOTA genuine filter.
[How to remove the secondary element]
1. While turning slightly, pull out the secondary element.
(1) Oil filter (2) Gasket
(1) Secondary element