16
6.
Turn the rods of the rotating cylinders 90 degrees.
And pull out J-shaped pins on both sides to the
position as shown left.
(1) Lift arm
(2) Connector
(3) Upper J-shaped pin
(4) Lower J-shaped pin
9.
Insert the J-shaped pins on both sides. Secure
them with the rue ring cotters.
10. Turn the rods of rotating cylinders back. Insert the
pins and secure them with the cotter pins.
(1) J-shaped pin
(2) Lower J-shaped pin
(3) Rue ring cotter
(4) Pin
(5) Cotter pin
11. Fix the back cover with the M10 bolts. Attach the
link plates and fix them with the rue ring cotters.
(1) Bolt
(2) Link plate
(3) Rue ring cotter
7.
Lift the front of the container and place it on the
platform.
8.
Lift the back of the container and put it on a wood
block or so. Insert the lower J-shaped pins on the
both sides, secure them with the rue ring cotters.
