Kubota D1102-B, Workshop Manual, Page: 48 / 109

KiSC issued 09, 2007 A
0
Removing Oil Pan, Oil Filter 1
1) Detach the oil pan.
2) Remove the oil filter 1. Be careful of the 0-ring.
f)
Removing Connecting Rod
1) Detach the connecting rod bolt.
2) Remove the cap of the large end of the connecting rod.
(Important)
• When reassembling, apply engine oil to the connect·
ing rod bolts.
(A)
(3) Removing Seal Set
1) Remove the seal set.
(1) Slinger
(2) Seal set
Tightening
torque
Non
Flange
Bolt
(3)
36.3 to 41.2 N-m
3.7 to 4.2 kgf-m
26.6 to 30.4 ft. lbs
Flange
Bolt (4)
44.1 to 49.0 N-m
4.5 to 5.0 kgf m
32.5 to 36.2 ft.lbs
A069F001
(B)
Connecting rod bolt
(3) Non flange bolt (4) Flange bolt
- 11 ,
(A) Reassembling of connecting rod
(1) Align the marks with each other.
(2) Face the marks toward the
injection pump.
45