Kubota D1102-B, Workshop Manual, Page: 38 / 109

KiSC issued 09, 2007 A
2.DISASSEMBLY AND REASSEMBLY
• ATTENTION: When reassembling, replace all the 0-ring and gaskets by new ones.
0
Removing Cylinder Head Cover
1) Remove cap nuts from the cylinder head cover.
2) Remove the cyl inder head cover and the gasket from the
cyl inder head.
( Note for reassembl ing)
• Tighten the cap nu ts to 6.9 to 8.8 N•m. (0.7 to 0.9
kgf·m, 5.1 to 6.5 lb.ft.)
• Be caref ul to ref it the breather oil shield in the right
direction.
8
Removing Alternator and Fan Belt
1) Remove the alternator.
2) Detach the fan bel t.
( Note for reassembling)
• Fan belt tension
The belt should def lect approx. 7 to 9 mm (0.2756 to
0.3543
in.) when the center of belt is depressed with a
finger pressu re of
58.8
to
68.6
N.
(6
to
7
kgf .,
13.2
to
15.4
l b.)
C,
Removing Rocker Arm and Push Rod
1) Detach the rocker arm.
2) Remove the push-rods.
( Note for reassembl ing)
• I nsert the push-rods into the tappets secu rely.
• Tigh ten the rocker arm bracket mou nting nuts to 23.5 to
27.5 N-m. (2.4 to 2.8 kgf ,m, 17.4 to 20.3 l b.f t.)
35