29. Re-fill tractor with engine coolant.
30. Start engine, turn heater on and run engine to purge system of air. Run with radiator cap
off and at higher throttle in order to get thermostat to open and cycle coolant into radiator
system. It will be necessary to top coolant up a few times to properly fill system.
31. To ensure a proper weather seal, use a black silicone sealant around all small open cracks
between the cab weather stripping and the tractor components.
Optional Winter Front:
32. Remove the air intake cover shroud from tractor.
33. Located the plastic panel shown in the next photo on the left side and remove from the
tractor.
34. Remove the plastic panel from the right side as well.
35. Take the cover shroud and position the winter front over the plastic shroud. Centre it on
the shroud and mark the button locations on one side of the shroud.
June 2021© Kubota BX80 Series ROPS Cab Installation Manual
