24. Remove off the factory fuel cap. Take the pre-assembled fuel fill assembly inside of the cab
and check for tolerance to install onto fuel cap. If the hose is too long, loosen clamps and
shorten as necessary to required length. Re-install hose and tighten fuel cap down onto fuel fill
nozzle. Tractor fuelling is now accomplished outside of the cab on the rear.
PLEASE NOTE:
The
rubber washer
MUST
be between the steel ring on the weldment and the top of the fuel neck
on the tractor, this will ensure that diesel fuel will NOT leak into the cab!
June 2021© Kubota BX80 Series ROPS Cab Installation Manual
