Kubota BX1880-AU, Operator'S Manual

Page: 87 / 110

2. Set the parking brake and stop the engine.
3. Shift the range-gear-shift-lever to the neutral [N]
position.
4. Check whether the speed-control-pedal is in the
neutral position.
5. Shift the PTO-clutch-lever to the off position.
Test of switches for the operator's seat and the
speed control pedal
1. Start the engine.
2. Depress the speed-control-pedal.
3. Stand up.
Do not get off the machine.
4. Make sure that the engine shuts off after
approximately 1 second.
5. If the engine does not stop, consult your local
KUBOTA Dealer.
Test of switches for the operator's seat and the PTO
clutch lever
1. Start the engine.
2. Engage the PTO-clutch-lever.
3. Stand up.
Do not get off the machine.
4. Make sure that the engine shuts off after
approximately 1 second.
5. If the engine does not stop, consult your local
KUBOTA Dealer.
(1) Range gear shift lever (Hi-
Lo)
(2) PTO clutch lever
(3) Speed control pedal
4. Checking the wheel bolt torque
WARNING
To avoid serious injury or death:
• Never operate the tractor with a loose rim,
wheel, or axle.
• Any time bolts are loosened, retighten to the
specified torque.
• Check all bolts frequently and keep them tight.
1. Check the wheel bolts regularly especially when
new.
2. If they are loose, tighten them as follows.
Front
Rear
(1) Front wheel bolt
(2) Rear wheel bolt
Front wheel bolt
Tightening
torque
149 N ⋅ m to 179 N ⋅ m
(15.2 kgf
⋅
m to 18.3 kgf
⋅
m)
[110 lbf
⋅
ft to 132 lbf
⋅
ft]
Rear wheel bolt
109 N
⋅
m to 130 N
⋅
m
(11.1 kgf ⋅ m to 13.3 kgf ⋅ m)
[80 lbf
⋅
ft to 96 lbf
⋅
ft]
SERVICE EVERY 50 HOURS PERIODIC SERVICE
BX1880, BX2380, BX2680
83