Kubota B2650, Operator'S Manual

Page: 82 / 112

62 MAINTENANCE
C
Engine Oil:
A
Oil used in the engine should have an American Petroleum Institute (API) service classification and Proper SAE
Engine Oil according to the ambient temperatures as shown above:
C
Fuel:
A
Use the ultra low sulfur diesel fuel only [below 0.0015% (15 ppm)] for these engines.
A
Cetane number of 45 is minimum. Cetane number greater than 50 is preferred, especially for temperatures below
-20
(-4 ) or elevations above 1500 m (5000 ft).
A
Diesel fuels specified to EN 590 or ASTM D975 are recommended.
A
No.2-D is a distillate fuel of lower volatility for engines in industrial and heavy mobile service. (SAE J313 JUN87)
C
Transmission Oil:
*KUBOTA Super UDT-2: For an enhanced ownership experience, we highly recommend Super UDT-2 to be used
instead of standard hydraulic/transmission fluid.
Super UDT-2 is a proprietary KUBOTA formulation that deliveries superior performance and protection in all operating
conditions.
Regular UDT is also permitted for use in this machine.
A
Indicated capacities of water and oil are manufacturer's estimate.
A
Refer to the following table for the suitable API classification engine oil according to the engine type
(with DPF or non-DPF (Diesel Particulate Filter) type engines) and the fuel.
A
The CJ-4 engine oil is intended for DPF (Diesel Particulate Filter) type engine.
Fuel used
Engine oil classification (API classification)
Oil class of engines except DPF
[B2650]
Oil class of engines with DPF
[B3350/B3350SU]
Ultra Low Sulfur Fuel
[<0.0015% (15 ppm)]
CF, CF-4, CG-4, CH-4 or CI-4 CJ-4