background image

Section 9: Warranty & Legal Disclaimer 

Table of Contents

4/5/19

AP-SRF2772, AP-SRF2790, AP-SR2772, & AP-SR2790 Powered Rakes 321-120MK

39

Legal Disclaimer

Kubota Corporation notes that specifications and technical information are subject to change without notice and Kubota
does not represent or warrant that the information in this publication is completely accurate or current; however, Kubota
used reasonable efforts to set forth and include accurate and up to date information in this publication. Kubota disclaims
all representations and warranties, whether express or implied, including, but not limited to, warranties of merchantability
and fitness for a particular purpose and Kubota shall not be liable for any damages, whether compensatory, direct,
indirect, incidental, special, or consequential, arising out of or in connection with the use of this publication, or in the
information therein.

The Product(s) described in this Publication are designed and manufactured only for the country in which they are
initially wholesaled by Kubota. Kubota does not provide parts, warranty or service for any Product which is re-sold or
retailed in any country other than the country for which the Product(s) were designed or manufactured.

Summary of Contents for AP-SR2772













































Reviews: