Section 5: Maintenance & Lubrication
AP-SC4060 & AP-SC4072 Skid Steer Rotary Cutters 326-765MK
12/14/18
27
Long-Term Storage
Clean, inspect, service, and make necessary repairs to
the attachment when storing it for long periods and at the
end of the season. This will help to ensure the unit is
ready for field use the next time you hook-up to it.
DANGER
!
To avoid serious injury or death:
•
Do not modify the Rotary Cutter without authorization from
Kubota. Unauthorized modifications to the cutter can result
in the cutter not performing properly and/or cause serious
injury or death.
•
Always secure equipment with solid, non-concrete supports
before working under it. Never go under equipment
supported by concrete blocks or hydraulics. Concrete can
break, hydraulic lines can burst, and/or hydraulic controls
can be actuated even when power to hydraulics is off.
Clean the Rotary Cutter at the end of the working season
or when the cutter will not be used for a long period.
1.
Clean off any dirt or grease that may have
accumulated on the cutter and moving parts. Scrape
off compacted dirt from the bottom of the deck and
then wash the surface thoroughly with a garden hose.
A coating of oil may also be applied to the lower deck
area to minimize oxidation.
2. Check blades and blade bolts for wear and replace if
necessary. See
3. Inspect for loose, damaged, or worn parts and adjust
or replace as needed.
4. Repaint parts where paint is worn or scratched to
prevent rust.
5. Replace all damaged or missing decals.
6. Lubricate as noted in the
Lubrication
portion of this
section starting on page 28.
7.
Store the Rotary Cutter in a clean, dry place. The deck
should be positioned on a flat surface to suitable skid
steer hook-up height. Ensure that the main frame is
stable.
Touch-Up Paint
Part No.
Part Description
821-070C
Gloss black enamel spray can
821-070CTU
Gloss black enamel bottle with brush
821-070CQT
Gloss black enamel quart
821-070CGL
Gloss black enamel gallon
