Introduction Important Safety Information
AP-SC4060 & AP-SC4072 Skid Steer Rotary Cutters 326-765MK
12/14/18
6
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Rotary Cutter have been specially
designed by Kubota/Land Pride and should only be
replaced with genuine Kubota parts. Contact a Kubota
dealer if customer service or repair parts are required.
Your Kubota dealer has trained personnel, repair parts,
and equipment needed to service the attachment.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Kubota dealer. For location of
your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your Kubota dealer wants you to be satisfied with your
new attachment. After having carefully read these
instructions, you will realize that most of the routine
maintenance can be done by yourself. If for any reason
you do not understand any part of this manual or are not
satisfied with the service received, the following actions
are suggested:
1.
Discuss any problems you have with your attachment
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
question/problem, and request assistance.
3. For further assistance write to:
Kubota by Land Pride
Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
NOTE:
A special point of information that the
operator should be aware of before continuing.
39980
Introduction
Kubota welcomes you to the growing family of new
product owners. This Skid Steer Rotary Cutter has been
designed with care and built by skilled workers using
quality materials. Proper assembly, maintenance, and
safe operating practices will help you get years of
satisfactory use from this product.
Application
SC4060 & SC4072 construction grade cutters are
designed with the commercial or high use consumer in
mind. The SC40 cutter features a rigid mounting system,
1/4" thick deck, 3 swinging blades and a solid blade
carrier allowing it to cut and shred brush or trees up to 4"
in diameter. The strong, reinforced leading edge of the
SC40 cutter allows the operator to push trees and brush
over without damaging the unit. The 2" to 18" cut height
range makes this cutter ideal for clearing right-of-ways
along road sides, pipelines or under electrical
transmission lines with the speed and efficiency needed
by today’s contractors. Farmers, ranchers and land
developers will also benefit from this unit when clearing
pastures or new development areas. The SC40 cutter
utilizes the power, compact size and the go anywhere
ability of a skid steer or CTL to access over grown areas
where a tractor and rotary cutter cannot go. The front
roller option along with the aggressive taper on the
standard full length skid shoes prevent the cutter from
digging in or getting hung up in the soft ground usually
found under heavy brush.
See
“Specifications & Capacities”
“Features & Benefits”
on page 31 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
•
Store your Operator’s Manual in the dry storage tube.
See Figure 1 on page 6 for location of storage tube.
Terminology
“Right” or “left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
IMPORTANT:
A special point of information related
to the following topic. Kubota’s intention is that this
information be read and noted before continuing.
