CARE AND MAINTENANCE:
Check and tighten all hardware after 20 hours of operation. Periodically inspect and tighten hardware for the
remainder of the unit
’
s service life. Keep the enclosure components clean in order to prevent dust and dirt
from forming an unattractive film. The life of your cab components depend upon following these care proce-
dures:
1.
NEVER USE
AN ABRASIVE DETERGENT / VEHICLE CLEANER OR A WIRE BRISTLED BRUSH. Do
not use any
CITRUS BASED CLEANERS
such as orange or lemon.
2.
NEVER USE
AN ALCOHOL
-
BASED PRODUCT FOR CLEANING PLASTIC WINDOWS.
Do not use
WINDEX, GLASS PLUS, FANTASTIC
, etc. Use of these products will result in deterioration
of the plastic windows.
3.
Clean the enclosure surfaces thoroughly with warm soapy water and a COTTON cloth or chamois. Be
sure to use mild soap, specifically a dish liquid or equivalent. Clean in a light circular motion for best
results.
4.
Use EXTRA CAUTION when cleaning the interior of the enclosure. The interior is more sensitive than
the exterior.
5.
Remove grease and oil with mineral spirits and a COTTON cloth or chamois.
OPERATION
8