7
Rear Mount Plate & Mount Arm Assembly Installation
To install the Rear Mount Plate (Item #1), first remove (3) existing metric fasteners (Item #8) from the mower’s
upper bumper tube as shown below. Once removed, align Rear Mount Plate to the mower’s upper bumper tube
and loosely reattach the previously removed metric fasteners (Item #8). Next, fasten the lower portion of the Rear
Mount Plate using (2) 3/8”-16 x 1” Carriage Bolts (Item #5) & (2) 3/8”-16 Ny-Flange Lock Nuts (Item #4) as shown
below. Tighten all fasteners.
To install the Mount Arm Assembly (Item #2), first align holes to the right side of the Rear Mount Plate as shown
and loosely fasten using (2) 3/8”-16 x 1” HHCS (Item #3) & (2) 3/8”-16 Ny-Flange Lock Nuts (Item #4). Next, loosely
fasten the Mount Arm Assembly to the upper bumper tube using (1) 3/8”-16 U-Bolt (Item #6) & (2) 3/8”-16 Ny-
Flange Lock Nuts (Item #4). Then, loosely fasten the Mount Arm Assembly to the lower bumper tube using (1) 3/8”-
16 U-Bolt (Item #7) & (2) 3/8”-16 Ny-Flange Lock Nuts (Item #4). Tighten all fasteners.
2
1
7
5
5
3
3
6
4
4
4
4
4
4
4
4
8
8
8
8
Item # Part #
Desc.
Qty.
1
B0992
Rear Mount Plate
1
2
A2127
Mount Arm Assy.
1
3
K1191
HHCS 3/8"-16 x 1" GR5
2
4
K2038
Ny-Flange Lock Nut 3/8"-16
8
5
K1182
Carriage Bolt 3/8"-16 x 1"
2
6
K1436
U-Bolt 3/8" x 2-1/4" x 1-3/4"
1
7
K0286
U-Bolt 3/8"-16 x 3-1/2" IW x 3-1/8" ID
1
8
Metric Bolt
Existing Bolt
4
Upper
Bumper
Tube
Lower
Bumper
Tube
