Kübler MWE40, Operation Manual

Page: 23 / 36

Kübler 7 Disposal
English
Operation Manual R60105.0009 - 01 EN | 23
• Remove operating and auxiliary materials and remaining
processing materials from the measuring system.
6.1 Cleaning the Measuring System
If the measuring wheel becomes soiled in adverse environ-
mental conditions, it can be cleaned according to the needs
with a detergent suitable for the material. Use a lint-free cloth.
6.2 Disassembly
To dismount the device, proceed in the reverse order of the
assembly, see chapter Installation [
} 20].
6.3 Reassembly
Reassembling the device is only permitted under the follow-
ing conditions:
• The device is not damaged.
• The screws can be newly secured against loosening.
• All safety instructions of chapter Installation [
}
20] can be
complied with.
• All assembly steps described in chapter Installation [ } 20]
can be performed.
7 Disposal
Always dispose of unusable or irreparable devices in an en-
vironmentally sound manner, according to the country-spe-
cific provisions and in compliance with the waste disposal
regulations in force. We will be glad to help you dispose of
the devices.
See chapter Contact [
}
24].
NOTICE
Environmental damage in case of incorrect disposal
Electrical waste, electronic components, lubricants and other
auxiliary materials are subject to hazardous waste treatment.
Problem substances may only be disposed of by licensed
specialist companies.
Dispose of disassembled device components as follows:
• Metal components in the scrap metal.
• Electronic components in the electrical waste.
• Plastic parts in a recycling center.
• Sort and dispose of the other components depending on the
material type.