Kübler CODIX 555, Manual, Page: 38 / 124

Page 6 www.kuebler.com
D Diig giitta all iin np pu uttss
Input MPI* Function of the inputs depending on set up
1. Function Display-Hold to stop the instantaneous value
2. Function Reset Reset the alarm value
Alarm Latch
3. Function Reset-Totalizer Resetting the Totalizer
*MPI: Multi Purpose Input
Input KEY Keypad lock-out of alarm settings
Switching level logical 0 0 ... 2 V DC
logical 1 4 ... 30 V DC
Min. pulse duration > 5 ms
Input MPI and Input KEY are galvanically isolated
22..22..33 O Ou uttp pu uttss
A Alla arrm m 11//A Alla arrm m o ou uttp pu utt 22
R Re ella ayy o ou uttp pu utt with volt-free changeover contacts
can be setup as normally closed or normally open
Switching voltage
250 V AC/300 V DC
Switching current max. 3 A AC/DC, min. 30 mA DC
Switching power 2000 VA / 50
Ω
o orr NPN-o op ptto oc co ou up plle err with open collector and open emitter
Switching power 30 V DC/15 mA
U
CEsat
at Ic = 15 mA max. 2.0 V DC
U
CEsat
at Ic = 5 mA max. 0.4 V DC
A Au uxxiilliia arryy p po ow we err ssu up pp pllyy o ou uttp pu utt ffo orr m me ea assu urriin ng g ttrra an nssd du uc ce err//sse en nsso orr
A AC C models
voltage output 10 V DC ±2%, 30 mA
and
voltage output 24 V DC ±15%, 50 mA
D DC C models
only voltage output 10 V DC ±2%, 30 mA
The auxiliary power supply is galvanically isolated from the inputs, outputs and
the interface.
22..22..44 IIn ntte errffa ac ce e
Available options RS232, RS485, RS422
Baud rate 600, 1200, 2400, 4800, 9600, 19 200 programmable
Address 00 ... 99 programmable
Data format 8 Data bit, no parity, 1 stop bit
Character format advanced ASCII character format of
IBM-PC without graphic characters
The interface is galvanically isolated from the inputs, outputs and auxiliary voltage.