“More than just Digital”
Page
33
of
81
Doc. Name: PEDRA User’s Manual/Doc. No.: PEDRA-1417M-UM
Initiate date: 2020.07.25 /Revision date: 2020.10.15 (Rev. 1)
3.2.3 Detector AP Connection
Detector AP mode is the wireless connection method that connecting the PC (Workstation) with the detector as
the center wirelessly.
The PEDRA 1417M detector and PC are connected wirelessly. In this case, the detector and the PC operate as AP
(Access Point) and STATION respectively.
Since Powera box is not used for configuring the detector AP mode, you can only use the AED mode without a
wired connection. (Cannot use the Line Trigger mode.)
This mode can be used when mobility and portability are needed.
When configuring the detector AP mode, be sure to check the specifications of wireless module installed in the
PC. The wireless communication performance can be different depending on the specifications of the wireless
module.
