KTM SXF 350, Owner'S Manual

Page: 41 / 102

SERVICE WORK ON THE CHASSIS
39
10.15
Greasing the steering head bearing
x
800010-10
–
Remove the lower triple clamp.
x
( p. 36)
–
Install the lower triple clamp. x ( p. 36)
10.16
Removing the start number plate
B00308-10
–
Remove screw

and take off the clamp.
–
Remove screw

. Take off the start number plate.
10.17
Installing the start number plate
B00308-11
–
Position the start number plate. Mount and tighten screw

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Info
Make sure that the holding lugs engage in the fender.
–
Position the brake line and clamp. Mount and tighten screw

.
10.18
Removing the front fender
B00307-10
–
Remove screws

. Remove the front fender.
–
Ensure that the spacers remain in place.
10.19
Installing the front fender
B00307-10
–
Ensure that the spacers are mounted in the fender.
–
Position the front fender. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Info
Make sure the holding lugs engage in the start number plate.