KTM Freeride 350, Owner'S Manual

Page: 86 / 113

TUNING THE ENGINE
84
15.4
Checking the basic position of the shift lever
400692-10
–
Sit on the vehicle in the riding position and determine distance
A
between the
upper edge of your boot and the shift lever.
Distance between shift lever and upper
edge of boot 10… 20 mm (0.39… 0.79 in)
» If the distance does not meet specifications:
–
Adjust the basic position of the shift lever.
x
( p. 84)
15.5
Adjusting the basic position of the shift lever
x
B01107-10
–
Remove screw
1
and remove shift lever
2
.
B01108-10
–
Clean gear teeth
A
of the shift lever and shift shaft.
–
Mount shift lever
2
on the shift shaft in the required position and engage the gear-
ing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
–
Mount and tighten screw
1
.
Guideline
Screw, shift lever M6 14 Nm
(10.3 lbf ft)
Loctite ® 243™