SERVICE WORK ON THE CHASSIS
53
400987-10
–
Pull on the upper part of the chain with the specified weight
A
.
Guideline
Weight, chain wear measurement
10… 15 kg (22… 33 lb.)
–
Measure the distance
B
of 18 chain links in the lower chain section.
Info
Chain wear is not always even, so you should repeat this measurement at
different chain positions.
Maximum distance
B
at the longest
chain section
272 mm (10.71 in)
» If the distance
B
is greater than the specified measurement:
–
Replace the chain.
x
Info
When the chain is replaced, the rear sprocket and engine sprocket
should also be changed.
New chains wear out faster on old, worn sprockets.
B01069-10
–
Check the chain sliding guard for wear.
» If the bottom edge of the chain bolt is in line with or below the chain sliding
guard:
–
Change the chain sliding guard.
x
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten the chain sliding guard.
Guideline
Remaining screws, chassis
M6
10 Nm
(7.4 lbf ft)
401470-01
–
Check the chain sliding piece for wear.
» If the bottom edge of the chain bolt is in line with or below the chain sliding
piece:
–
Change the chain sliding piece.
x
–
Check that the chain sliding piece is firmly seated.
» If the chain sliding piece is loose:
–
Tighten the chain sliding piece.
Guideline
Screw, chain sliding piece
M8
15 Nm
(11.1 lbf ft)
Summary of Contents for Freeride 350
Page 1: ...OWNER S MANUAL 2012 Freeride 350 Art no 3211720en...
Page 2: ......
