KTM Freeride 250 R EU, Owner'S Manual

Page: 81 / 115

15 ELECTRICAL SYSTEM
79
M01038-10
Main work
–
Adjust the beam distance of the headlight by turning screw

.
Guideline
For a motorcycle with rider, the light/dark boundary must be exactly on the lower
mark (the mark is created in: Checking the headlight setting).
Info
Turn clockwise to increase the headlight range, turn counterclockwise to
reduce the headlight range.
A change in weight on the vehicle may require a correction of the headlight
range.
15.12 Changing the speedometer battery
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. ( p. 75)
M01039-10
Main work
–
Remove screws

.
–
Pull the speedometer upward out of the holder.
M01040-10
–
Using a coin, turn protection cap

all the way counterclockwise and remove it.
–
Remove speedometer battery

.
–
Insert the new battery with the label facing outward.
Speedometer battery (CR 2032) ( p. 98)
–
Check the O-ring of the protection cap for correct seating.
M01041-10
–
Position protection cap

and turn all the way clockwise using a coin.
–
Press any button on the speedometer.
The speedometer is activated.
–
Position the speedometer in the holder.
–
Mount and tighten the screws with washers.
Finishing work
–
Refit the headlight mask with the headlight. ( p. 76)
–
Check the headlight setting. ( p. 78)
–
Set the speedometer. ( p. 19)