KTM Freeride 250 R EU, Owner'S Manual

Page: 77 / 115

15 ELECTRICAL SYSTEM
75
15.5 Changing the fuses of individual power consumers
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Fold the seat up. ( p. 46)
B01682-10
Main work
–
Open fuse box cover  .
M01034-10
–
Remove the defective fuse.
Guideline
Fuse
1
- 10 A - horn, brake light, turn signal, speedometer
Fuse 2 - 10 A - radiator fan
Fuses res - 10 A - spare fuses
Info
A defective fuse is indicated by a burned-out fuse wire

.
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are
used.
–
Use only fuses with the prescribed amperage. Never bypass or repair
fuses.
–
Use spare fuses with the correct rating only.
Fuse (75011088010) ( p. 98)
Tip
Replace the spare fuse in the fuse box so that it is available if needed.
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover.
Finishing work
–
Lock the seat. ( p. 46)
15.6 Removing the headlight mask with the headlight
Preparatory work
–
Switch off all power consumers and switch off the engine.