12
SERVICE WORK ON THE CHASSIS
46
12.17
Installing the front fender
B01030-10
–
Position the front fender. Mount and tighten screws
.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
Info
Make sure the holding lugs engage in the headlight mask.
12.18
Folding the seat up
M01054-10
–
Push the release lever
in the direction of the arrow.
–
Lift the seat and fold it up.
12.19
Locking the seat
M01055-01
–
Fold down the seat and push it down.
The seat engages with an audible click.
–
Finally, check that the seat is correctly locked.
12.20
Removing the air filter housing
Note
Engine failure
Unfiltered intake air has a negative effect on the service life of the engine.
–
Never operate the vehicle without an air filter as dust and dirt will enter the engine and lead to increased wear.
Preparatory work
–
Fold the seat up. (
