KTM 990 Adventure R USA 2010, Owner'S Manual

Page: 160 / 225

MAINTENANCE WORK ON FRAME AND ENGINE
158
100614-10
–
Pour in coolant until it emerges without bubbles at the vent hole, and then mount and
tighten the bleeder screw immediately.
Alternative 1
Coolant ( p. 210)
Alternative 2
Coolant (mixed ready to use) ( p. 210)
–
Fill the radiator completely with coolant. Mount the radiator cap.
–
Lean the vehicle on the side stand.
–
Check the coolant level in the compensating tank. ( p. 151)
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may result
in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
–
Start the engine and run it until it reaches operating temperature.
Six bars of the temperature display light up.