KTM 990 Adventure R USA 2010, Owner'S Manual

Page: 158 / 225

MAINTENANCE WORK ON FRAME AND ENGINE
156
100612-10
–
Place a suitable container under the radiator.
–
Remove screw

.
–
Remove radiator cap.
–
Completely drain the coolant.
–
Mount screw

with a new seal ring and tighten it.
Guideline
Remaining chassis screws M6 10 Nm (7.4 lbf ft)
100611-10
–
Place a suitable container under the engine.
–
Remove screw

.
–
Completely drain the coolant.
–
Mount screw

with a new seal ring and tighten it.
Guideline
Screw, water pump cover M6 10 Nm (7.4 lbf ft)
Filling/bleeding the cooling system
x
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
–
Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.