KTM 990 Adventure R USA 2010, Owner'S Manual

Page: 140 / 225

MAINTENANCE WORK ON FRAME AND ENGINE
138
–
Remove the headlight mask with the headlight. ( p. 135)
100638-10
–
Remove rubber cap

.
–
Pull socket

out of the headlight and pull bulb

out of the socket.
–
Insert the new bulb into the socket and insert the socket into the headlight.
Parking light (W5W / socket W2.1x9.5d) ( p. 199)
–
Replace the rubber cap.
–
Install the headlight mask with the headlight. ( p. 136)
Changing the turn signal bulb
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
100597-10
–
Remove the screw on the rear of the turn signal housing.
–
Carefully remove diffuser

.
–
Press bulb

carefully into the socket, turn it counterclockwise by about 30°, and pull
it out of the socket.
Info
Do not touch the reflector with your fingers, and keep it free from grease.
–
Press the new bulb carefully into the socket and turn it clockwise until it stops.