KTM 990 Adventure AUS 2009, Owner'S Manual

Page: 52 / 213

800108-10
–
Turn the emergency OFF switch to the position .
–
Switch on the ignition by turning the black ignition key to the position .
After you switch on the ignition, you can hear the fuel pump working for about two
seconds. The function test of the combination instrument is run at the same time.
The ABS warning lamp lights up and goes back out when you start riding.
–
Shift the transmission to neutral.
The green idling speed indicator lamp

lights up.
–
Press the electric starter button .
Do not press the electric starter button until the function test of the combination
instrument is finished.
When starting,
open the throttle. If you open the throttle during the start-
ing procedure, fuel is not injected by the engine management system and the
engine cannot start.
Press the starter for a maximum of 5 seconds. Wait for a least 5 seconds before
trying again.
This motorcycle is equipped with a safety start system. You can only start the
engine if the transmission is in neutral or if the clutch is pulled when a gear is
engaged. If you engage a gear with the side stand folded down, the engine stops.
–
Take the motorcycle off of the main stand or side stand.