KTM 990 Adventure AUS 2009, Owner'S Manual

Page: 158 / 213

100626-10
–
Raise the vehicle off of the center stand. ( p. 67)
–
Place the vehicle on the side stand.
–
Place a suitable container under the engine.
–
Remove oil drain plug

.
–
Fully drain the engine oil out of the engine.
–
Remove screws

and move oil line

to one side.
100627-10
–
Pull oil sieve

out of the oil tank.
–
Remove the oil filter. x ( p. 158)
–
Clean all oil screens and oil drain plugs with a magnet.
–
Clean all sealing surfaces.
100628-10
–
Check seal ring

of the oil sieve for damage and correct seating.
–
Insert oil sieve

into the oil tank.
–
Position the oil line. Mount and tighten the screws.
Guideline
Remaining chassis screws M6 10 Nm (7.4 lbf ft)
–
Mount oil drain plug

with the magnet and new seal and tighten.