KTM 990 Adventure AUS 2009, Owner'S Manual

Page: 198 / 213

Screw, heat guard on manifold M6 8 Nm (5.9 lbf ft)
–
Screw, magnetic holder on side stand M6 6 Nm (4.4 lbf ft)
Screw, rear brake disc M6 14 Nm (10.3 lbf ft)
Screw, wheel speed sensor, rear M6 8 Nm (5.9 lbf ft)
Nut, manifold on cylinder head M8 Tightening sequence:
Tighten the nuts evenly. Do
not bend the metal.
–
Remaining chassis nuts M8 30 Nm (22.1 lbf ft)
–
Remaining chassis screws M8 25 Nm (18.4 lbf ft)
–
Screw, bottom triple clamp M8 15 Nm (11.1 lbf ft)
–
Screw, exhaust clamp M8 8 Nm (5.9 lbf ft)
–
Screw, fork stub M8 15 Nm (11.1 lbf ft)
–
Screw, front brake caliper M8 25 Nm (18.4 lbf ft)
Screw, fuel tank M8 15 Nm (11.1 lbf ft)
–
Screw, handlebar clamp M8 20 Nm (14.8 lbf ft)
–
Screw, ignition lock (ratchet screw) M8
Screw, rear footrest bracket M8 25 Nm (18.4 lbf ft)
Screw, spring holder on side stand
bracket M8 25 Nm (18.4 lbf ft)
Screw, steering stem M8 20 Nm (14.8 lbf ft)
–
Screw, top triple clamp M8 20 Nm (14.8 lbf ft)
–
Screw, underride guard M8 25 Nm (18.4 lbf ft)
Engine carrying screw M10 45 Nm (33.2 lbf ft)
–
Remaining chassis nuts M10 50 Nm (36.9 lbf ft)
–
Remaining chassis screws M10 45 Nm (33.2 lbf ft)
–