KTM 790 Adventure 2019 Page 57 Owner'S Manual Download

Page: 57 / 359

COMBINATION INSTRUMENT 7

7.1

Combination instrument

F01763-10

The combination instrument is attached in front of the handlebar.
The combination instrument is divided into two function areas.

indicator lamps (

p. 60)

Display

7.2

Activation and test

F01764-01

Activation

The combination instrument is activated when the ignition is
switched on.

Info

The brightness of the displays is controlled by an ambient
light sensor in the combination instrument.

Test

The welcome text appears on the display and all indicator lamps
are briefly activated for a function check.

Summary of Contents for 790 Adventure 2019








































































































































































































































































































































































Search results

Summary of Contents for 790 Adventure 2019

Reviews:

Related manuals for 790 Adventure 2019

Brands by name

Popular brands

KTM 790 Adventure 2019, Owner'S Manual

Search results

Summary of Contents for 790 Adventure 2019

Reviews:

Related manuals for 790 Adventure 2019

Brands by name

Popular brands