KTM 790 Adventure 2019 Page 250 Owner'S Manual Download

Page: 250 / 359

15 WHEELS, TIRES

248

F02071-10

–

Push the rear wheel forward as far as possible. Take the chain
off the rear sprocket and place it on chain sprocket guard

Info

Cover the components to protect them against damage.

–

Hold the rear wheel and remove the wheel spindle.

–

Pull the rear wheel back until the brake caliper bracket is sus-
pended freely between the brake disc and rim.

Warning

Danger of accidents

Damaged brake discs reduce the

braking effect.

–

Always lay the wheel down in such a way that the
brake disc is not damaged.

–

Take the rear wheel out of the link fork.

Info

Do not operate the foot brake lever when the rear wheel
is removed.

Summary of Contents for 790 Adventure 2019








































































































































































































































































































































































Search results

Summary of Contents for 790 Adventure 2019

Reviews:

Related manuals for 790 Adventure 2019

Brands by name

Popular brands

KTM 790 Adventure 2019, Owner'S Manual

Search results

Summary of Contents for 790 Adventure 2019

Reviews:

Related manuals for 790 Adventure 2019

Brands by name

Popular brands