KTM 690 Enduro R, Owner'S Manual

Page: 113 / 191

MAINTENANCE WORK ON CHASSIS AND ENGINE
111
9.50
Mounting the seat
800096-10
–
Hook slot

of the seat onto screw

, press the rear downward and at the same time
push it forward.
–
Push locking pin

into lock housing

and push the back of the seat down until the
locking pin locks in place with an audible click.
–
Finally, check that the seat is correctly mounted.
9.51
Removing the battery
x
Warning
Risk of injury Battery acid and battery gases cause serious cauterization.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep the battery away from sparks or open fire. Charge only in well ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least 15
minutes and contact a doctor.
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. ( p. 110)