KTM 690 Enduro R, Owner'S Manual

Page: 138 / 191

MAINTENANCE WORK ON CHASSIS AND ENGINE
136
100283-11
–
Remove the cap from compensating tank

and add coolant to the level shown in the
figure.
–
Mount the cap of the compensating tank.
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may result
in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
–
Start the engine and run it until the 5th bar of the temperature indicator lights up.
–
Switch off the engine and allow it to cool down.
–
After the engine has cooled down, check the coolant level in the radiator and in the
compensating tank again and add more coolant if necessary.
9.71
Adjusting basic position of clutch lever
Info
Turn the adjusting screw clockwise to increase the distance between the clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!