KTM 690 Enduro R, Owner'S Manual

Page: 127 / 191

MAINTENANCE WORK ON CHASSIS AND ENGINE
125
800100-10
–
Pull bulb socket

out of the reflector.
–
Pull parking light bulb

out of the bulb socket.
–
Insert a new parking light bulb in the bulb socket.
Parking light (W5W / socket W2,1x9,5d) ( p. 168)
–
Insert the bulb socket in the reflector.
–
Install the headlight mask with the headlight. ( p. 122)
9.61
Changing the turn signal bulb
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
100160-10
–
Remove the screw on the rear of the turn signa housing.
–
Tilt headlamp diffuser

forward carefully and take it off.
–
Press the turn signal bulb carefully into the socket, turn it counterclockwise by about
30°, and take it out of the socket.
Info
Do not touch the reflector with your fingers, and keep it free from grease.
–
Press the new turn signal bulb carefully into the socket and turn it clockwise until it
stops.
Turn signal (RY10W / socket BAU15s) ( p. 168)