KTM 690 Enduro R 2019, Owner'S Manual

Page: 236 / 274

20 TROUBLESHOOTING
234
Faults Possible cause Action
Engine overheats. Air in cooling system
–
Fill/bleed the cooling system.
(
p. 205)
Malfunction indicator lamp
lights up Error in the electronic fuel
injection
–
Read out the fault memory using the
KTM diagnostics tool.
Engine dies during the journey Lack of fuel
–
Refuel. ( p. 77)
Fuse 1 , 2 or 3 blown
–
Change the fuses of individual power
consumers. (
p. 183)
ABS warning lamp lights up The ABS fuse is blown
–
Change the ABS fuses. ( p. 181)
Large difference in wheel
speeds of the front and rear
wheels
–
Stop the vehicle, switch off the igni-
tion, and start it again.
Malfunction in ABS
–
Read out the ABS fault memory using
the KTM diagnostics tool.
High oil consumption Engine vent hose bent
–
Route the vent hose without bends or
change it if necessary.
Engine oil level too high
–
Check the engine oil level. ( p. 215)
Engine oil too thin (low viscos-
ity)
–
Change the engine oil and oil filter,
clean the oil screens.
( p. 216)
Headlight and parking light are
not functioning Fuse
6
blown
–
Change the fuses of individual power
consumers. (
p. 183)
Turn signal, brake light and
horn not functioning Fuse 5 blown
–
Change the fuses of individual power
consumers. (
p. 183)