11 SERVICE WORK ON THE CHASSIS
98
It must be possible to move the handlebar easily over the
entire steering range. There should be no detectable detent
positions.
» If detent positions are detected:
–
Adjust the steering head bearing play.
–
Check the steering head bearing and adjust if neces-
sary.
Finishing work
–
Remove the motorcycle from the lift stand. (
11.8
Adjusting the steering head bearing play
Preparatory work
–
Raise the motorcycle with a lift stand. (
R05381-10
Main work
–
Loosen screws
1
. Loosen screw
2
.
–
Loosen and retighten screw
3
.
Guideline
Screw, top steering
head
M20x1.5
12 Nm (8.9 lbf ft)
–
Using a plastic hammer, tap lightly on the upper triple clamp
to avoid stresses.