ENGLISH
36
MAINTENANCE WORK ON CHASSIS AND ENGINE
»
– Position the float, mount the float hinge pin and secure it by means of
the screw.
– Check the float level.
– Stick the plastic component
[1]
on the needle jet.
– Engage the push rod
[2]
of the accelerator pump at the lever.
– Mount the float chamber and at first secure it with only 1 screw. When
positioning the float chamber, make sure that the push rod
[2]
of the acce-
lerator pump slides into the bore.
– Place the membrane
[3]
with the labeling facing upwards and the spring
into the pump housing.
– Place the O-ring
[4]
into the groove. Secure the sealing ring
[5]
with some
grease in the cover and fasten the cover by means of 3 screws.
– Turn the cable disc and push the throttle valve into the carburetor such
that the rollers
[6]
engage the throttle valve (see photo). Push the throttle
valve all the way into the carburetor.
– Turn the cable disc several times and while doing so check whether the
throttle valve moves smoothly.
1
2
5
4
3
6
2