KTM 660 RALLY 2007, Supplement Manual, Page: 35 / 40

ENGLISH
35
MAINTENANCE WORK ON CHASSIS AND ENGINE
»
Assembling the carburetor (Keihin MX 41)
– Mount the idle-air jet [1] and the main air jet [2] .
– Place the O-ring [3] in the groove and secure the intake trumpet to the
carburetor by means of the 2 screws.
– Insert the fuel connection
[4]
into the carburetor and secure it with the
clip.
Note: In the mounted state, the connection piece must be easy to turn.
– Mount the choke slide [5] and actuate it several times, checking whether
it can be moved smoothly. In addition, check whether the choke locks
properly.
– Thread the spring, the washer and the O-ring onto the mixture control screw
[6]
and screw the mixture control screw in as far as it will go.
– Now, unscrew the mixture control screw the number of turns written down
during disassembly.
Basic setting: See technical specification
– Mount idling jet
[7]
, starting jet
[8]
and needle jet together with main
jet
[9]
.
– Insert the needle jet [10] into bore and secure it by means of the
screw [11] .
4
2
1
3
6
7
8
9
11
10
5