ENGLISH
7
Kickstarter
The kickstarter is mounted on the left side of the engine. Its upper part can
be swivelled.
Foot brake pedal
The foot brake pedal is located in front of the right foot rest. Its basic
position can be adjusted to your seat position (see maintenance work).
Handlebar lock
The handlebar can be locked by means of the lock located on the control
head. Fully turn handlebar to right to lock, insert key, turn to left, press in,
turn to right and withdraw.
!
CAUTION
!
N
EVER LEAVE THE KEY INSERTED IN THE LOCK
. I
F YOU TURN THE STEERING TO THE LEFT
THE KEY COULD GET DAMAGED
.
Compression damping of fork
The compression damping is to be set at the lower end of the fork tubes. It
only regulates the degree of damping during compression. Remove closing
cap
A
. By using the knob
1
(COM), the degree of damping of the
compression can be adjusted. Turn the knob clockwise to increase damping,
turn it counterclockwise to reduce damping during compression.
STANDARD ADJUSTMENT:
– turn adjusting screw clockwise as far as it will go
– turn it back by as many clicks as are specified for the relevant type of fork
WP 0518W712 ................... 20 clicks
(625 SC)
WP 0518W722 .................... 14 clicks
(625 SC SUPERMOTO)
Rebound damping of fork
Hydraulic rebound damping determines the reaction when the fork is re-
bound. By turning the knob
2
, the degree of damping of the rebound can
be adjusted. Turn the knob clockwise to increase damping, turn it counter-
clockwise to reduce damping during rebounding.
STANDARD ADJUSTMENT:
– turn adjusting screw clockwise as far as it will go
– turn it back by as many clicks as are specified for the relevant type of fork
WP 0518W712 ................... 12 clicks
(625 SC)
WP 0518W722 .................... 14 clicks
(625 SC SUPERMOTO)
2
2
A
1
