30/ENGINE - WORK ON INDIVIDUAL PARTS
80
16.8
Dismantling centrifugal clutch
Condition
The centrifugal clutch has been removed.
300513-10
–
Loosen screws
with special tool.
Mortise key (45229021000) (
300514-10
–
Remove screw
with spacing washer
and spring
.
Info
Washer
is used for adjusting the clutch engagement speed and does not
have to be fitted.
–
Remove clutch shoe
.
–
Repeat these steps on the other clutch shoes.
16.9
Assembling centrifugal clutch
Condition
The centrifugal clutch has been removed.
300514-11
–
Position the clutch shoe
.
–
Fit screw
with spacing washer
and spring
.
Info
Washer
is used for adjusting the clutch engagement speed and must be
fitted consistently on all clutch shoes depending on the clutch engagement
speed.
–
Repeat these steps on the other clutch shoes.
300513-11
–
Tighten screws
with special tool.
Guideline
Screw, clutch spring
M6
7 Nm (5.2 lbf ft)
Mortise key (45229021000) (
16.10
Checking/measuring clutch
Condition
The centrifugal clutch has been removed.
300610-10
–
Measure clutch.
Guideline
Clutch shoe height
≥
98.00 mm (
≥
3.8583 in)
» If the specified value is not reached:
–
Replace the clutch linings.
–
Dismantle the centrifugal clutch. (
–
Check clutch linings for damage.
PartShark.com
877-999-5686