ENGLISH
18
Adjusting the idle speed (Dell’Orto SHA 1412) *
The idle speed can be adjusted with throttle stop screw
1
.
Turning in clockwise direction will increase the idle speed.
Turning in counterclockwise direction will reduce the idle speed.
Adjusting the idle speed (Mikuni VM18-144) *
The idle speed can be adjusted with throttle stop screw
2
.
Turning in clockwise direction will increase the idle speed.
Turning in counterclockwise direction will reduce the idle speed.
Function of air control screw
3
: turning it clockwise makes the idle mixtu-
re richer, while turning it counter-clockwise makes it leaner.
The basic setting is described in the chapter "Technical Specifications".
!
CAUTION
!
Never set the idle speed by means of the air control screw!
Adjusting the idle speed (Mikuni VM14-117) *
The idle speed can be adjusted with throttle stop screw
4
.
Turning in clockwise direction will increase the idle speed.
Turning in counterclockwise direction will reduce the idle speed.
Function of mixture control screw
5
: turning it clockwise makes the idle
mixture leaner, while turning it counter-clockwise makes it richer.
!
CAUTION
!
Never set the idle speed by means of the mixture control screw!
Checking the gear oil level
To check the gear oil level, first remove the plug
6
. With the motorcycle
parked in an upright position, a small quantity of oil should flow out of the
indicator opening
7
. If oil must be added, tilt the motorcycle and pour gear
oil ( Shell Advance EP 80) into the bore.
!
CAUTION
!
T
OO LITTLE OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR
.
T
HEREFORE
,
ONLY USE BRANDED PRODUCTS
(S
HELL
A
DVANCE
EP 80).
1
4
5
7
6
2
3
