SERVICE WORK ON THE CHASSIS 11
61
F01573-10
–
Using a plastic hammer, tap lightly on the upper triple
clamp to avoid stresses.
–
Tighten screws
8
.
Guideline
Screw, top triple
clamp
M8
17 Nm
(12.5 lbf ft)
–
Secure the wiring harness with cable holder
9
on the
left.
F01835-10
(HERLINGS REPLICA, FACTORY EDITION)
–
Position the upper triple clamp with the handlebar.
–
Mount screw
4
, but do not tighten yet.
H01182-11
–
Position the fork legs.
Air bleeder screw
5
of the right fork leg is positioned
to the front.
Valve
A
of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the
top) must be flush with the upper edge of the upper
triple clamp.
The air suspension is located in the left fork leg.
The pressure and rebound damping is located in
the right fork leg.
F01836-10
–
Tighten screws
6
.
Guideline
Screw, bottom
triple clamp
M8
12 Nm (8.9 lbf ft)
F01837-10
–
Tighten screw
4
.
Guideline
Screw, top steering
head
M20x1.5
12 Nm (8.9 lbf ft)
Summary of Contents for 450 SX-F 2019
Page 2: ......
