15
COOLING SYSTEM
138
101912-10
Main work
–
Stand the motorcycle upright.
–
Place a suitable container under the engine.
–
Remove screw
1
.
–
Remove the radiator cap.
–
Completely drain the coolant.
–
Mount screw
1
with a new seal ring and tighten it.
Guideline
Plug, water pump drain hole
M6
8 Nm (5.9 lbf ft)
15.5
Filling/bleeding the cooling system
x
Warning
Danger of poisoning
Coolant is poisonous and a health hazard.
–
Coolant must not come into contact with the skin, eyes, or clothing. If contact occurs with the eyes, rinse with water immedi-
ately and contact a physician. Immediately clean contaminated areas on the skin with soap and water. If coolant is swallowed,
contact a physician immediately. Change clothing that is contaminated with coolant. Keep coolant out of reach of children.
101911-11
–
Remove radiator cap
1
.
Summary of Contents for 390 Duke 2015 COL
