KTM 390 Duke 2015 COL Page 123 Owner'S Manual Download

Page: 123 / 182

ELECTRICAL SYSTEM

121

Fuse (75011088010) (

p. 163)

Fuse (75011088015) (

p. 163)

Fuse (75011088030) (

p. 163)

Tip

Replace the spare fuse in the fuse box so that it is available if needed.

–

Check that the power consumer is functioning properly.

–

Close the fuse box cover.

Finishing work

–

Mount the passenger seat. (

p. 79)

14.6

Changing the headlight bulb

Note

Damage to reflector

Reduced brightness.

–

Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.

Preparatory work

–

Switch off all power consumers and switch off the engine.

Summary of Contents for 390 Duke 2015 COL























































































































































































Search results

Summary of Contents for 390 Duke 2015 COL

Reviews:

Related manuals for 390 Duke 2015 COL

Brands by name

Popular brands

KTM 390 Duke 2015 COL, Owner'S Manual

Search results

Summary of Contents for 390 Duke 2015 COL

Reviews:

Related manuals for 390 Duke 2015 COL

Brands by name

Popular brands