KTM 390 Duke 2015 COL Owner'S Manual Download

Page: 105 / 182

WHEELS, TIRES

103

13.1

Removing the front wheel

Preparatory work

–

Raise the motorcycle with the rear wheel stand. (

p. 75)

–

Raise the motorcycle with the front wheel stand. (

p. 76)

B01391-10

Main work

–

Remove screws

and push the fender to the side.

–

Remove screw

and pull wheel speed sensor

out of the hole.

–

Loosen screws

and screw

–

Unscrew screw

about six turns and press your hand on the screw to push the wheel

spindle out of the axle clamp. Remove screw

Warning

Danger of accidents

Reduced braking effect caused by damaged brake discs.

–

Always lay the wheel down in such a way that the brake discs are not dam-
aged.

–

Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
fork.

Info

Do not pull the hand brake lever when the front wheel is removed.

Summary of Contents for 390 Duke 2015 COL























































































































































































Search results

Summary of Contents for 390 Duke 2015 COL

Reviews:

Related manuals for 390 Duke 2015 COL

Brands by name

Popular brands

KTM 390 Duke 2015 COL, Owner'S Manual

Search results

Summary of Contents for 390 Duke 2015 COL

Reviews:

Related manuals for 390 Duke 2015 COL

Brands by name

Popular brands