KTM 390 Duke 2015 COL Owner'S Manual Download

Page: 77 / 182

SERVICE WORK ON THE CHASSIS

11.1

Raising the motorcycle with the rear wheel stand

Note

Danger of damage

The parked vehicle may roll away or fall over.

–

Always place the vehicle on a firm and even surface.

B01387-01

–

Mount the support of the wheel stand.

–

Insert the adapter in the rear wheel stand.

Adapter (61029055130)
Rear wheel stand (61029055400)

–

Stand the motorcycle upright, align the lifting gear with the swingarm and the adapters,
and lift the motorcycle.

11.2

Taking the motorcycle off of the rear wheel stand

Note

Danger of damage

The parked vehicle may roll away or fall over.

–

Always place the vehicle on a firm and even surface.

Summary of Contents for 390 Duke 2015 COL























































































































































































Search results

Summary of Contents for 390 Duke 2015 COL

Reviews:

Related manuals for 390 Duke 2015 COL

Brands by name

Popular brands

KTM 390 Duke 2015 COL, Owner'S Manual

Search results

Summary of Contents for 390 Duke 2015 COL

Reviews:

Related manuals for 390 Duke 2015 COL

Brands by name

Popular brands