SERVICE WORK ON THE CHASSIS
60
400985-01
–
Check the chain guide for wear.
Info
Wear is visible on the front of the chain guide.
» If the light part of the chain guide is worn:
–
Change the chain guide.
x
100865-10
–
Check that the chain guide is firmly seated.
» If the chain guide is loose:
–
Tighten the chain guide.
Guideline
Remaining screws, chassis
M6
10 Nm
(7.4 lbf ft)
Remaining nuts, chassis
M6
15 Nm
(11.1 lbf ft)
–
Remove the motorcycle from the lift stand. (
10.40
Adjusting the chain guide
x
100857-10
–
Remove the nut of screw
.
–
Remove screws
and
. Take off the chain guide.
Condition
Number of teeth:
≤
44 teeth
–
Insert nut
in hole
. Position the chain guide.
–
Mount and tighten screws
and
.
Guideline
Remaining screws, chassis
M6
10 Nm
(7.4 lbf ft)
–
Mount the nut on screw
and tighten.
Guideline
Remaining nuts, chassis
M6
15 Nm
(11.1 lbf ft)
Condition
Number of teeth:
≥
45 teeth
–
Insert nut
in hole
. Position the chain guide.
–
Mount and tighten screws
and
.
Guideline
Remaining screws, chassis
M6
10 Nm
(7.4 lbf ft)
–
Mount the nut on screw
and tighten.
Guideline
Remaining nuts, chassis
M6
15 Nm
(11.1 lbf ft)
10.41
Checking the throttle cable routing
–
Dismount the fuel tank.
